S.L	Item	Specification	Remark	Total Price
1	Power Easel	1m23m		USD65,000
2	Input table	0.5m×23m	Pneumatic feeding, 2.2KW VFD reducer, Speed 40m/min
3	Digital Length limiter	0m-10m	Drive by VFD motor with gear rack Vertical movement after cut driven by pneumatic equipment. Length meters shown on meter gauge Input length onto a touch screen
4	Output table	0.5m×10m	Pneumatic plate to push finished tubes from output table to finished table. 2.2KW VFD motor, speed40m/min,
5	Finished tube table	1m×10m
6	Electric & pneumatic

Following is specification of automatic feeding of input table. Output table has the same principle and mechanical structure.

1. List a bundle of tubes onto easel table. Tubes are scattered on the table.

2. Piston starches out, driving connecting rod to rotate switch plate to vertical direction.

3. It’s above the easel when switch plate at vertical direction, then one tube get raised over the easel. Due to the slop on the switch plate, tube falls onto the lowest position of the switch plate.

4. Piston retreats back, the switch plate rotates back to horizontal direction, switch plate gets lower, and tube lay onto input table.

5. Tube gets transferred towards saw direction by motorized rollers or clamp.

Product Tags:

metal tube cutting machine

circular saw metal cutting machine

400w metal cutting machine

Inquiry Cart 0